HP XP24000/XP20000 Remote Web Console Error Codes (AE131-96086, November 2011)

Table 26 Error Codes — Part Code 1005 (continued)
Failure
Level
Severity
Level
Recommended ActionError MessageError
Number
Part
Code
6ECheck the settings, and then
retry.
The host mode “4C” can only
be used with External Storage
volumes.
13681005
3WCheck the setting of the host
mode option.
The specified host mode
option can be set only for a
specific port attribute.
13691005
6EInstall the necessary program
product. When an SLPR is
This functionality is not
available. LUN Manager is
required.
16001005
allocated, install a necessary
program product for the SLPR.
6EInstall the necessary program
product. When an SLPR is
This functionality is not
available. Open Volume
Management is required.
16011005
allocated, install a necessary
program product for the SLPR.
6ESelect another volume.The specified volume cannot
be assigned as a LUSE
19041005
volume or a command
device, and the path of the
volume cannot be set
because it is being used as a
Pool volume.
6ESelect another volume.There are virtual volumes and
non-virtual volumes in the
19051005
volumes specified to compose
a LUSE volume.
6ESelect another volume.The specified volume cannot
be set as a command device
19061005
because it is being used as a
V-VOL for XP Snapshot.
6ECorrect the settings, and then
retry the operation.
The specified volume is a
remote command device, and
19121005
therefore the command
device setting or the
command device security
setting cannot be set or
released.
6EDelete the external volume
that is mapped to the external
An external volume is
mapped to the external port
19181005
port to be operated, and then
retry the operation.
to be operated. Delete the
external volume that is
mapped to the external port
to be operated, and then
retry the operation.
6ECheck the volume, and then
retry the operation.
The specified volume is not a
LUSE volume.
19211005
6ERestore the LDEVs, and then
retry the operation.
LDEVs that are not normal are
included in the component of
a LUSE volume.
19221005
6ECheck the setting.The path cannot be set to the
specified volume, because
19261005
the volume is being used as
a quorum disk.
Remote Web Console Error Codes 107