HP XP24000/XP20000 Remote Web Console Error Codes (AE131-96086, November 2011)

Table 26 Error Codes — Part Code 1005 (continued)
Failure
Level
Severity
Level
Recommended ActionError MessageError
Number
Part
Code
damage to the logical paths.
Please stop this operation. If
delete the logical path, and
then retry the port setting.
you want to continue this
operation, please remove the
logical paths from the MCU
port first.
6EBecause the port you are
trying to set is for XP
S-VOLs remain on the
Fibre-RCU port. This
13531005
Continuous Access, you mustoperation may cause a fatal
delete the S-VOL logical pathdamage to S-VOLs. Please
that is set to RCU Target, and
then retry the port setting.
stop this operation. If you
want to continue this
operation, please remove the
S-VOLs from the RCU port
first.
6ETo register the WWN,
change the attribute of the
You could not register the
WWN to the initiator or
external port.
13541005
specified port to Target or
RCU Target.
6ETo change the host mode,
change the attribute of the
You could not change the
host mode of the host group
13551005
specified port to Target or
RCU Target.
that you connected to the
initiator or external port.
6ETo add the host group,
change the attribute of the
You could not add the host
group to the initiator or
external port.
13561005
specified port to Target or
RCU Target.
6EThe specified port is for Fibre
XP Continuous Access. Delete
S-VOLs remain on the
Fibre-RCU port. This
13571005
a logical path, and then retry
the operation.
operation may cause a fatal
damage to the S-VOLs.
Please stop this operation. If
you want to continue this
operation, please remove the
S-VOLs from the RCU port
first.
2EReduce the number of user LU
settings, and then retry the
operation.
No more user LUs can be set,
because the number of user
LU settings has reached the
maximum.
13611005
6ECheck the attributes of the
external volumes, and then
retry the operation.
The LUSE volume cannot be
configured because the
external volumes do not have
the same cache mode.
13621005
6ECorrect the settings, and then
retry the operation.
You cannot add paths to
journal volumes.
13631005
5WCheck the port type, and then
retry the operation.
The port type is incorrect.13641005
6ECheck the settings, and then
retry.
The host mode “4C” is used
for a host group connecting
13671005
to volumes that cannot be
used for External Storage.
106 Remote Web Console for Storage System Messages and Error Codes