HP XP24000/XP20000 Remote Web Console Error Codes (AE131-96086, November 2011)

Table 26 Error Codes — Part Code 1005 (continued)
Failure
Level
Severity
Level
Recommended ActionError MessageError
Number
Part
Code
2ERelease the Port Group
setting.
Because the Port Group
setting is done, it is
11401005
impossible to change.
Release the Port Group
setting.
6ECorrect settings, and then
retry.
The volume cannot be
configured as a command
11701005
device because the volume
does not have Read/Write
attribute.
6ECorrect the settings, and then
retry.
The specified host ID is
already registered.
11741005
6ECorrect the settings, and then
retry.
The specified host is already
registered.
11771005
6ECorrect the settings, and then
retry.
An incorrect host name was
specified.
11781005
2EIf this problem persists call HP
technical support.
An error occurred. If this
problem persists call HP
technical support.
11801005
6WCorrect the specification, and
then retry the operation.
The specified path cannot be
added, because the volume
11811005
is used by a XP Continuous
Access pair.
2EIf this problem persists call HP
technical support.
An error occurred. If this
problem persists call HP
technical support.
11821005
0WCorrect the port information
or the PCB mode information.
The port information is
inconsistent with PCB mode
information.
11831005
0WCorrect the port information
or the PCB mode information.
The port information is
inconsistent with PCB mode
information.
11841005
6EThe configuration information
has been already changed.
You are trying to insert in the
linkage operation including
11851005
Check the settings, and
request the setting of the
LUSE. (LDEV number is
inserted to the LDEV numbers
created in LUSE).
configuration information
again.
6EThe configuration information
has been already changed.
In the linkage operation
including LUSE, the path is
11861005
Check the settings, and
request the setting of the
specified to other than the
top.
configuration information
again.
6EThe configuration information
has been already changed.
You cannot expand the LU
because the host mode of the
11871005
Check the settings, and
request the setting of the
group with paths which are
defined in the LU is
corresponding to online
LUSE.
configuration information
again.
104 Remote Web Console for Storage System Messages and Error Codes