HP XP24000/XP20000 Remote Web Console Error Codes (AE131-96086, November 2011)

Table 26 Error Codes — Part Code 1005 (continued)
Failure
Level
Severity
Level
Recommended ActionError MessageError
Number
Part
Code
current configuration and
then make settings again.
6ECorrect the specified contents,
and request the setting of the
The specified WWN is
already in use. Specify
another WWN.
10631005
configuration information
again.
6EThe configuration information
has been already changed.
You are trying to register the
same WWN as the already
10641005
Check the settings, and
request the setting of the
registered one. Check the
settings and request the
setting of the configuration
information again.
configuration information
again.
6ECorrect the specified contents,
and request the setting of the
The specified host name or
the host group name is
10651005
configuration information
again.
already registered. (The host
name and the host group
name cannot be the same.)
6EThe configuration information
has been already changed.
WWN number, which is not
registered, is specified.
(When deleting, or changing)
10661005
Check the settings, and
request the setting of the
configuration information
again.
6EThe configuration information
has been already changed.
You are trying to register the
same host group number as
the already registered one.
10671005
Check the settings, and
request the setting of the
configuration information
again.
6EThe configuration information
has been already changed.
The specified host group has
not been registered.
10681005
Check the settings, and
request the setting of the
configuration information
again.
6ECheck the setting, and then
retry the operation.
The following volumes cannot
be specified when you
11081005
change the command device
configurations:
• Volumes reserved by Auto
LUN
• Volumes other than the
open-system volumes
(including unmounted
volumes)
• System Disk volume
2EIf this problem persists, call
HP technical support.
An error occurred. If this
problem persists, call HP
technical support.
11101005
Remote Web Console Error Codes 101