HP XP24000/XP20000 LUN Manager User Guide (T5214-96092, November 2011)

Table 12 LUN Manager Spreadsheet Format (continued)
Function Tag
[LDEV][LUN][WWN][HostGroup][Port][Cha]Column
Cmd SecCuBlankOption[0:31]Connection5th
BlankLdevOption[32:63]Channel speed6th
BlankBlankOption[64:95]Blank7th
Blank8th
Blank9th
Blank10th
LdkcPortPortPortPortCha11th
CuGroup IdGroup IdGroup IdSecurity SwitchPcbMode12th
LdevLunIdWWNGroup NameAL-PABlank13th
Cmd DevLdkcNicknameHost ModeFabric14th
Cmd SecCuBlankOption[0:31]Connection15th
BlankLdevOption[32:63]Channel speed16th
BlankBlankOption[64:95]Blank17th
NOTE: When the LUN Manager spreadsheet is exported, the settings are written up to the 10th
column (blank column).
Setting the CHA Mode
Use the [CHA] tag to set the channel adapter mode. The [CHA] tag is available only for changing
settings. You cannot add or delete the settings with the [CHA] tag definitions.
Mainframe settings are not written on the exported spreadsheet. If you are using 8 Gbps settings,
you cannot set HighSpeed for the PCB mode. When you want to set the initiator/external mix
mode for the PCB mode, set HighSpeed just as when you set the high speed mode.
(page 94) lists the available configuration definitions for the [CHA] tag.
Table 13 Available Configuration Values for the [CHA] Tag
Available ValuesItemColumn
One of the following can be set:Cha1st, 11th (Index)
CHA-1AL,CHA-1AU,CHA-1BL,CHA-1BU,CHA-1EL,CHA-1EU,CHA-1FL,
CHA-1FU,CHA-1GL,CHA-1GU,CHA-1HL,CHA-1HU,CHA-1KL,CHA-1KU,
CHA-1LL,CHA-1LU,CHA-2ML,CHA-2MU,CHA-2NL,CHA-2NU,CHA-2QL,
CHA-2QU,CHA-2RL,CHA-2RU,CHA-2TL,CHA-2TU,CHA-2UL,CHA-2UU,
CHA-2WL,CHA-2WU,CHA-2XL,CHA-2XU
One of the following can be set:PcbMode2nd, 12th
• High Speed mode of 2 ports:
Standard: Standard mode (all ports)
HighSpeed: High Speed mode (all ports)
HighSpeed(Block-A): The upper two ports of the CHA are the High Speed
mode.
94 Performing LUN Manager Operations Using Configuration File Loader