HP XP24000/XP20000 for FlashCopy Mirroring Software User Guide (T5240-96012, November 2011)

Table 53 ANTRQST Macro Command Parameters (Version 2) (continued)
DescriptionValueParameterCommand
Use this parameter when the
TGTUCB parameter is NO
or the REMOTE parameter
is YES.
Specifies the LDEV number
of the T-VOL on which you
T-VOL LDEV numberTGTDVC
want to perform the
FCESTABLISH command.
Use this parameter when the
TGTUCB parameter is NO,
or the REMOTE parameter
is YES.
The Remote FlashCopy
function is used to establish
a relationship.
YESREMOTE
You do not use the Remote
FlashCopy function.
NO
The Remote FlashCopy
function is not used to
establish a relationship.
Specifies the TrueCopy for
Mainframe source device
number (device address).
TrueCopy for Mainframe
source device number
DEVN
Use this parameter when
REMOTE is YES.
Specifies the serial number,
of the storage system
Serial number of the storage
system containing the S-VOL
SRCSERIAL
containing the S-VOL on
which you want to perform
the FCESTABLISH
command.
Use this parameter when
REMOTE is YES.
Specifies the CU number of
the S-VOL on which you
S-VOL CU numberSRCLSS
want to perform the
FCESTABLISH command.
Use this parameter when
REMOTE is YES.
Specifies the LDEV number
of the S-VOL on which you
S-VOL LDEV numberSRCDVC
want to perform the
FCESTABLISH command.
Use this parameter when
REMOTE is YES.
Specifies the SSID of the CU
on which you establish the
FlashCopy relationship.
SSIDSSID
Use this parameter when
REMOTE is YES.
Establishing Version 2 Relationships 99