HP XP24000/XP20000 for FlashCopy Mirroring Software User Guide (T5240-96012, November 2011)

Table 53 ANTRQST Macro Command Parameters (Version 2) (continued)
DescriptionValueParameterCommand
target of the specified
area (within the extent).
The relationship is made by
NOCOPY mode and is
NO2CPY
copied in the background.
When all the data is copied,
the relationship is released
automatically.
The path group is not
checked. The relationship is
YESONLINTGT
established even when the
copy target is online.
The path group is checked.
The relationship is not
NO
established when the copy
target is online.
NO is the default setting.
Suspends the write
operations from the host to
FREEZEACTIONREQUEST=FCESTABLISH
S-VOLs. To resume the write
operation, you need to issue
the FCWITHDRAW command
with the ACTION parameter.
However, if a timeout
occurs, the write operation
may be resumed although
you do not issue the
FCWITHDRAW command.
The default setting of timeout
is 120 seconds (2 minutes),
but you may change it.
For detailed information
about changing the timeout
period, see (page 80).
Specify the S-VOL and the
T-VOL of the relationship into
reverse.
FRR
• If you specify YES for
INCREMENTAL, only the
updated part of the
S-VOL or the T-VOL of the
established relationship
will be copied.
• If you specify NO for
INCREMENTAL or specify
nothing, only the copied
part from the S-VOL to the
T-VOL of the established
relationship will be
copied.
Specifies the device number
(device address) of the
YESTGTUCB
T-VOL on which you want to
perform the FCESTABLISH
command. To specify this
Establishing Version 2 Relationships 97