HP XP24000/XP20000 Business Copy Software User Guide (T5213-96034, November 2011)

Table 40 Error Code and Error Contents When Operating RAID Manager (continued)
Error ContentsError Code (SSB2)Error Code (SSB1)
The specified pairs contain the volumes of the XP Continuous Access
asynchronous pairs. Because the CLPRs of the P-VOL and S-VOL of the
specified pair were different, the quick restore operation was rejected.
20a0
Because the P-VOL was the XP Thin Provisioning V-VOL whose capacity
was increasing, the create pair operation was rejected.
20a2
Because the S-VOL was the XP Thin Provisioning V-VOL whose capacity
was increasing, the create pair operation was rejected.
20a3
Because the specified consistency group number was being used by
XP Snapshot, the pair operation was rejected.
20a9
Because the volume specified as the P-VOL was an XP Thin Provisioning
V-VOL and its zero data area was being discarded, the pair creation
was rejected.
20aa
Because the volume specified as the S-VOL was an XP Thin Provisioning
V-VOL and its zero data area was being discarded, the pair creation
was rejected.
20ab
Because the volume specified as the P-VOL was an XP Thin Provisioning
V-VOL and its capacity was increasing, the pair creation was rejected.
20b0
Because the volume specified as the S-VOL was an XP Thin Provisioning
V-VOL and its capacity was increasing, the pair creation was rejected.
20b1
Because the volume specified as the P-VOL was the S-VOL of FlashCopy
Mirroring V2, the pair operation was rejected.
22f6
Because the volume specified as the S-VOL was the P-VOL or the S-VOL
of FlashCopy Mirroring V2, the pair operation was rejected.
22f7
Because the volume specified as the S-VOL was the P-VOL or the S-VOL
of FlashCopy Mirroring V2, the quick restore operation or the reverse
copy operation was rejected.
22f9b9a0/b9a1/b9a2/
b9a5/b9a6/b9ae/
b9af
The pair operation was rejected because of one of the following
reasons:
2301
• Shared memory is not allocated.
• XP Business Copy is not installed.
Because the volume specified as the P-VOL or the volume specified as
the S-VOL was not the top volume of the LUSE volume, the pair
operation was rejected.
2302
Because the LBA size of the specified P-VOL was not the same as the
size of the specified S-VOL, the pair operation was rejected.
2306
Because the number of pairs exceeded the maximum number of pairs,
the pair creation was rejected.
2309
Because the volume specified as the S-VOL was the P-VOL of the XP
Business Copy pair whose MU number is 0, the pair creation was
rejected.
230A
Because the pair was being suspended or deleted, the pair operation
was rejected.
230B
The pair operation was rejected due to one of the following causes:2310
1. Because the specified consistency group number had already been
used for the L1 pair, the pair creation was rejected.
2. Because the specified consistency group number had already been
used for the L2 pair, the pair creation was rejected.
98 Troubleshooting