HP StorageWorks XP24000/XP20000 Thin Provisioning Software User Guide (T5227-96015, May 2011)

1. Access the V-VOL window by selecting Go Volume Manager V-VOL (see “Selecting the
V-VOL Group” (page 66)).
2. In the V-VOL Group–V-VOL tree on the left side of the window, select the V-VOL group that
contains the V-VOLs that you want to associate with a pool. This will display the information
for the individual V-VOLs on the right side of the window.
3. In the right side of the window, right-click one or more V-VOLs, and select Associate V-VOL
with Pool to display the Connect Pool dialog box (see “Selecting the Pool” (page 66)). You
can only select from rows with black font.
4. Select the pool ID that you want to associate with the V-VOL group, and then select Next to
display the Change Threshold dialog box (see “Changing the Threshold” (page 67)).
5. Select the threshold from the list, and then click Set to implement the settings and return to the
V-VOL window. You can set thresholds from 5% to 300% in 5% increments.
6. Click Apply, and then click OK to associate the V-VOL with the pool.
Figure 37 Selecting the V-VOL Group
Figure 38 Selecting the Pool
66 Performing XP Thin Provisioning Operations