HP StorageWorks XP24000/XP20000 Thin Provisioning Software User Guide (T5227-96015, May 2011)

DescriptionItem
The LDEV number grid.
• The location on the grid indicates the LDEV number.
The numbers across the top (CU number), combined
with the numbers on the left side, indicate the LDEV
number. For example, the LDEV number of the cell with
a CU number of +2 and an LDEV number of +10 is 12.
• Gray cells indicate LDEV numbers that are already in
use.
• White cells indicate unused LDEV numbers.
• Blue cells indicate LDEVs that have been selected for
the V-VOLs in this procedure.
Select LDEV No.
If checked, allows you to select CU numbers from another
SLPR.
CU number of another SLPR is used
Maintains the settings in this dialog box while returning
you to the Create V-VOL dialog box (1) (see “Create V-VOL
Dialog Box (1)” (page 43)).
Back
Implements the settings in this dialog box and opens the
Create V-VOL Confirmation Dialog Box (see “Create V-VOL
Confirmation Dialog Box” (page 49)).
The Create V-VOL dialog box (3) (see “Create V-VOL Dialog
Box (3)” (page 47)) appears only when SSID is not
assigned to the boundary area that contains LDEV numbers
you set in this dialog box. The Create V-VOL dialog box
(4) appears when SSID is assigned.
Next
Cancels the operation and closes the dialog box.Cancel
46 Using the XP Thin Provisioning GUI