HP StorageWorks XP24000/XP20000 SNMP Agent Reference Guide (AE131-96088, May 2011)

Error Report
The following table lists the errors to be reported for the REQUEST operations.
Table 3 SNMP Agent REQUEST Operations
Corrective ActionDescriptionError
N/ANormalnoError(0)
Verify that the requested object is
correct.
• There are no MIB objects that are
required. (Not supported).
• The GETNEXT REQUEST command
that is specified for the following
object identifier of the last
supported MIB object is received.
noSuchName(2)
SET operation is not supported.SET REQUEST is received.readOnly(4)
Retry the operation.Error occurred for other reasons.genErr(5)
SNMP Manager Functions
Component Status Information
You can obtain the status information for certain storage system components from an SNMP
manager. The following table lists the components for which the status can be obtained.
Table 4 Available Component Status Information
Component NameArea
ProcessorStorage System
BUS
Cache
Shared memory
Power supply
Battery
Fan
Others
Hard Disk Drive
Power supplyDisk Unit
Fan
Others
Drive
The following table lists the storage system component status as well as the trap report function.
Table 5 Storage system Component Status Types
DescriptionStatus
Normal operation.Normal
All operations in a storage system stopped.Acute failure detected
Operation in a component where a failure occurred stopped.Serious failure detected
8 Overview of SNMP