HP StorageWorks XP24000/XP20000 Remote Web Console Users Guide (AE131-96067, July 2009)

• If your operating system is UNIX and a shell program is installed in a directory other than /bin,
modify the batch file that you copied earlier.
Open the batch file and change #! /bin/csh in the first line of the directory that a shell program
is installed (such as /usr/bin/csh).
• Start the command prompt, then move to the following directory:
\CFL-installed-directory\Tools\CFL_CLI
• Execute the batch file in the following format. For UNIX, enter .sh after mkatfile (mkatfile.sh).
mkatfile SVP-ip-address user-id password > myAuthentication.txt
Specify the following items:
• SVP-ip-address: specify the IP address of the SVP. To use an IPv6 address, enclose the IPv6
address in square brackets [ ].
• user-id: specify the user ID of the storage administrator.
• password: specify the password of the storage administrator.
• When you execute the command, a user authentication file named myAuthentication.txt
is created in the current directory.
• You can rename this user authentication file. Only single-byte characters can be specified for
the file name. Extension must be .txt. If you rename the file, you need to change the name
of the user authentication file written in the batch file.
• Set the appropriate access to the user authentication file that you created.
Make sure that only the user who created the file can access the file.
• Example:
In this example for Windows, myAuthentication.txt is created from the information such as
the IP address (158.214.135.127), user ID (root), and password (root).
mkatfile 158.214.135.127 root root >myAuthentication.txt
In this example for Windows, myAuthentication.txt is created from the information such as
the IP address (fe80::20a:e4ff:fe8f:20b5), user ID (root), and password (root).
mkatfile [fe80::20a:e4ff:fe8f:20b5] root root >myAuthentication.txt
Modifying a Batch File
The batch files provided by Remote Web Console to be used for executing the CFL Extension
commands can be manually modified, if necessary. The batch files are as follows:
Table 22 Batch Files for Executing the CFL Extension Commands
DescriptionFile NameDirectory
batch file for the CFLCHK commandcflchk
\Tools\CFL_CLI\
Sample
batch file for the CFLGET commandcflget
batch file for the CFLSET commandcflset
XP24000/XP20000 Remote Web Console User's Guide 143