HP StorageWorks XP24000/XP20000 Remote Web Console Users Guide (AE131-96067, July 2009)

1. Log in to Remote Web Console, and open the E-mail Information window (see Figure
37 on page 91).
2. Change to Modify mode (see “Changing Between View Mode and Modify Mode” on page 48).
3. Make sure that Mail Notice is set to Enable and that the settings in the window is correct.
4. Click Test Send. A confirmation message appears.
5. Click OK.
6. Confirm that mail clients received the email with the reference code 7FFFFF.
An example of a test email is as follows:
Date: FRI 03 OCT 2008 10:10:10 +9000 (JST)
To: [e-mail]
From: [e-mail]
Reply-To: [e-mail]
Subject: XP Disk Array Report
Date : 03/10/2008
Time : 10:09:30
Machine : HP-XP-DiskArray(Seq.# 11111)
RefCode : 7FFFFF
Detail: This is Test Report.
Table 21 Details of Email for SIMs Notice
DescriptionItem#
Date and time when an e-mail was sent. The mail server decides this
information.
Date1
Email address of the receiver.To2
Email address of the sender.From3
Email address to which replies from the receivers will be sent. Optional.Reply-To4
Email title. Cannot be changed. .Subject5
Date when a SIM occurred.Date6
Time when a SIM occurred.Time7
Name and serial number of the storage system.Machine8
Reference code. The same code as the one reported by SNMP traps.RefCode9
SIM details. The same information as the one reported by SNMP traps.Detail10
See the HP StorageWorks XP24000/XP20000 SNMP Agent Reference Guide for reference codes
and failure details.
XP24000/XP20000 Remote Web Console User's Guide 123