HP StorageWorks XP24000/XP20000 Remote Web Console Error Codes (AE131-96086, May 2011)

Table 23 Error Codes — Part Code 0610 (continued)
Failure
Level
Severity
Level
Recommended ActionError MessageError
Number
Part
Code
0WTo continue processing, click
[OK]. To stop processing,
click [Cancel].
Are you sure you want to
delete the selected row?
90600610
0iEnter the numerical value to
ExG again.
The available numerical
values for the ExG range
from 1 to 16,384.
91300610
0iTo continue processing, click
[OK]. To stop processing,
click [Cancel].
It takes time to execute the
request. Do you still want to
execute this request?
91310610
0iEnter the numerical value to
ExG.
The numerical value is not
entered to ExG.
93610610
5iThe extended shared memory
for XP External Storage needs
to be installed. Call HP
technical support.
The extended shared memory
for External Storage is not
installed.
585200610
0iIf you have performed the
Disconnect operation, click
[Yes]. If you have not
performed the Disconnect
operation, click [No]. To
cancel the operation, click
[Cancel].
Have you performed the
Disconnect operation?
If you execute Delete Volume
without executing the
Disconnect operation while
non-reflected data exists on
the cache, the non-reflected
data is not reflected to the
external volume.
590140610
0WClick [OK].The volume is mapped as a
mainframe volume by the
Add Volume operation.
Format the volume before
using it.
590150610
0iClick [OK].No emulation type is
selected. Select the emulation
type.
590160610
0iClick [OK].No LDEV is selected. Select
the LDEV.
590170610
0iClick [OK].The setting is insufficient for
automatic mapping. Check
the setting, and then retry the
operation.
590200610
0iRetry the operation.The automatic mapping
processing was interrupted.
590210610
0iDecrease the number of
external volumes to be
mapped, and then retry the
operation.
There are not enough logical
volumes to perform the
mapping operation.
590220610
0iClick [OK].The Check Paths processing
began. After three minutes,
click [Refresh] on the File
menu to check the path
status.
590290610
Remote Web Console Error Codes 97