HP StorageWorks XP24000/XP20000 Remote Web Console Error Codes (AE131-96086, May 2011)

Table 22 Error Codes — Part Code 0605 (continued)
Failure
Level
Severity
Level
Recommended ActionError MessageError
Number
Part
Code
5ERelease the allocation of
mirrors in the journal group
for the remote command
device.
The specified volumes include
remote command devices
being used with mirrors in the
journal group of XP
Continuous Access Journal or
the Universal Replicator for
Mainframe. Release the
allocation of mirrors in the
journal group for the remote
command device.
688710605
5ERelease the quorum disks
then retry the operation.
Quorum disks are included
in the items to be maintained.
688840605
5ECheck the status of the
mapping path, resolve the
root cause of the blockade,
and then retry the operation.
An external volume was not
able to be recovered.
689010605
5ECheck the status of the
mapping path, resolve the
root cause of the blockade if
needed, and then retry the
operation.
The external volume was able
to be restored, but some of
mapping paths were not able
to be restored normally.
689020605
5ECheck the states of the
external volume and the
mapping path. Do not retry
the operation until the states
return to normal.
If the states cannot be
restored to normal, or if the
problem persists despite
retrying, call HP technical
support.
Failed to disconnect from the
external volume.
689030605
Table 23 Error Codes — Part Code 0610
Failure
Level
Severity
Level
Recommended ActionError MessageError
Number
Part
Code
0WDecrease the Volumes that
are set to the external volume
group, and then retry the
operation.
The number of LUs that can
be set to the external volume
group exceeds the maximum
(4096).
65050610
5WRelease the R-VOLs that have
been set.
R-VOLs exist on the RCU port.65160610
2EIf this problem persists, call
HP technical support.
An error occurred during
processing. If this problem
persists, call HP technical
support.
70600610
2EIf this problem persists, call
HP technical support.
An error occurred during
processing. If this problem
persists, call HP technical
support.
71110610
0iAn error occurred during the
indicated operation. See the
error code for each operation
in Preview List.
An error occurred. Check the
error code.
90050610
96 Remote Web Console for Storage System Messages and Error Codes