HP StorageWorks XP24000/XP20000 Remote Web Console Error Codes (AE131-96086, May 2011)

Table 22 Error Codes — Part Code 0605 (continued)
Failure
Level
Severity
Level
Recommended ActionError MessageError
Number
Part
Code
5ERelease the reserved volume
setting of XP Business Copy,
ShadowImage for Mainframe
or FlashCopy Mirroring, and
then retry the operation.
The reserved volume setting
of Business Copy,
ShadowImage for Mainframe
or Compatible FlashCopy(R)
is defined. Release the
reserved volume setting of
Business Copy,
ShadowImage for Mainframe
or Compatible FlashCopy(R),
and then retry the operation.
565190605
5ERelease the reserved volume
setting of XP Auto LUN, and
then retry the operation.
The reserved volume setting
of Auto LUN is defined.
Release the reserved volume
setting of Auto LUN, and then
retry the operation.
565200605
5EIncrease the licensed
capacity for the program
products that do not have
sufficient licensed capacity,
and then retry the operation.
The licensed capacity of
some program products will
be insufficient because of the
Add Volume operation.
565210605
3ESelect another window. To
set this function, contact the
storage administrator.
This function cannot be used
by the storage partition
administrator.
565240605
0WCorrect the licensed capacity
with the License Key Partition
Definition window.
The licensed capacity was
exceeded because of
changing the configuration.
Correct the licensed capacity
on the License Key Partition
Definition window.
565360605
2EIf this problem persists, call
HP technical support.
An error occurred during SVP
processing. If this problem
persists, call HP technical
support.
571010605
5ECheck whether the
DKCMAIN microcode version
and the SVP microcode
version are mismatched.
This function is not supported.582460605
5ERestore the blocked path
status, and then retry the
operation.
All the paths to the external
volume are blocked.
582580605
5EMake the setting of the paths
to keep at least one path
available, and then retry the
operation.
No paths will be available,
if you change the setting of
paths.
582630605
5EExecute Check Path & Restore
Volume instead of Disconnect
paths or Check paths.
After Disconnect subsystem
or Disconnect volume is
executed, neither Disconnect
paths nor Check paths can
be executed.
583300605
5EIf this problem persists, call
HP technical support.
The path requested by
Disconnect paths or Check
paths was not found.
583310605
Remote Web Console Error Codes 87