HP StorageWorks XP24000/XP20000 Remote Web Console Error Codes (AE131-96086, May 2011)

Table 1 Error Codes — Part Code 0001 (continued)
Failure
Level
Severity
Level
Recommended ActionError MessageError
Number
Part
Code
1ELog on again.
A network error may occur
when the load of another
application program working
on the same computer with
Remote Web Console is high.
Increase the value of the RMI
timeout period when network
error occurs.
A network error occurred.
The probable cause is:
• A timeout error occurred
during communication
with the SVP.
40110001
2ELog on again after a while.The number of clients logged
on to the RMI server has
exceeded 32.
40120001
2EFailed to access the Config
file. Call HP technical
support.
The server configuration is
invalid. Call HP technical
support.
40130001
2ELock is removed. Lock again.Network error detected;
exclusive lock is released.
40200001
2EIf the same problem persists
despite retrying, call HP
technical support.
An error occurred during SVP
processing. If this problem
persists, call HP technical
support.
50130001
0WEnter correct user ID or
password.
The user ID or password is
invalid.
50140001
2WIf this problem persists, call
HP technical support.
An error occurred during SVP
processing. If this problem
persists, call HP technical
support.
50750001
2EIf the same problem persists
despite retrying, call HP
technical support.
An error occurred during SVP
processing. If this problem
persists, call HP technical
support.
50990001
1ELog on with a different user
ID. There is a possibility that
the termination process in the
previous logon was invalid.
(Terminated by clicking the
end button of the browser.)
After RMI Time-out (default 1
min.), log on again.
The specified user ID is
already logged on, or the
previous logon was not
properly terminated.
Try again later. (By default,
the session/RMI time-out is
one minute.)
51320001
2EIf this problem persists, call
HP technical support.
An error occurred during SVP
processing. If this problem
persists, call HP technical
support.
53000001
2EIf the same problem persists
despite retrying, call HP
technical support.
An error occurred during SVP
processing. If this problem
persists, call HP technical
support.
53010001
8 Remote Web Console for Storage System Messages and Error Codes