HP StorageWorks XP24000/XP20000 Remote Web Console Error Codes (AE131-96086, May 2011)

Table 19 Error Codes — Part Code 0505 (continued)
Failure
Level
Severity
Level
Recommended ActionError MessageError
Number
Part
Code
6WWait a few seconds, and
retry the operation.
A time-out error occurred.
Wait for a while, and then
retry the operation. If this
problem persists, call HP
technical support.
65020505
5WWait a few seconds, and
retry the operation.
Communication busy. Retry
later.
65060505
6WThe licensed capacity of the
program product became
insufficient. Install the
program product with the
required capacity.
The licensed capacity of the
program product became
insufficient because required
capacity exceeded the
current maximum.
65070505
3WIf this problem persists, call
HP technical support.
The SVP is busy. Please wait
for a while, and then retry the
operation.
65310505
2EIf this problem persists, call
HP technical support.
An error occurred during SVP
processing. If this problem
persists, call HP technical
support.
71040505
2EIf this problem persists, call
HP technical support.
An error occurred during SVP
processing. If this problem
persists, call HP technical
support.
71100505
2EIf this problem persists, call
HP technical support.
An error occurred during SVP
processing. If this problem
persists, call HP technical
support.
71110505
2EIf this problem persists, call
HP technical support.
An error occurred during SVP
processing. If this problem
persists, call HP technical
support.
72010505
6WCheck the status of the disk
storage system (for example,
the storage system is blocked,
the shared memory is
inconsistent, or some other
problem occurs). If this
problem persists, call HP
technical support.
The status of the storage
system requires maintenance
(for example, the subsystem
is blocked, the shared
memory is inconsistent, or
some other problem occurs).
Call HP technical support.
72020505
2ERetry the same operation
several times. If this problem
persists, call HP technical
support.
An error occurred while
connecting to the subsystem.
Wait for a while, and then
retry the operation.
80010505
6EIf the same problem persists
despite retrying, call HP
technical support.
An error occurred while
connecting to the subsystem.
Wait for a while, and then
retry the operation.
81000505
2ERetry the same operation
several times. If this problem
persists, call HP technical
support.
The subsystem status is
invalid. Call HP technical
support.
83100505
Remote Web Console Error Codes 77