HP StorageWorks XP24000/XP20000 Remote Web Console Error Codes (AE131-96086, May 2011)

Table 16 Error Codes — Part Code 0405 (continued)
Failure
Level
Severity
Level
Recommended ActionError MessageError
Number
Part
Code
5EObtain the block license
again.
The permanent key cannot be
used after the license is
changed to the block license.
565090405
3ESelect another window. To
set this function, contact the
storage administrator.
This function cannot be used
by the storage partition
administrator.
565240405
5ECall HP technical support.The contents of the license file
are incorrect. Call HP
technical support.
570030405
3EIf this problem persists, call
HP technical support.
An error occurred during SVP
processing. If this problem
persists, call HP technical
support.
570920405
3EIf this problem persists, call
HP technical support.
An error occurred during SVP
processing. If this problem
persists, call HP technical
support.
570930405
3EIf this problem persists, call
HP technical support.
An error occurred during SVP
processing. If this problem
persists, call HP technical
support.
570940405
3EInstall the program product
by using another license key
code.
A registered license key code
was reinstalled.
570950405
3EThe maximum number of
licenses which can be
registered to a program
product is 1,024.
The number of licenses of a
program product has
exceeded the maximum
which can be registered.
570960405
3EIf this problem persists, call
HP technical support.
An error occurred during SVP
processing. If this problem
persists, call HP technical
support.
570970405
3EIf this problem persists, call
HP technical support.
An error occurred during SVP
processing. If this problem
persists, call HP technical
support.
570980405
5WAllocate the licensed capacity
to each SLPR if you want to
use it continuously.
The licensed capacity of each
SLPR of SLPR1-31 is to be set
to 0 GB.
Allocate the licensed capacity
to use it continuously. If
capacity is not allocated
within 30 days, the license of
the SLPR becomes invalid.
650890405
5EIncrease the licensed
capacity and install it again.
Or, delete the licensed
capacity of unnecessary
SLPR.
The licensed capacity to be
installed is insufficient.
650900405
Remote Web Console Error Codes 73