HP StorageWorks XP24000/XP20000 Remote Web Console Error Codes (AE131-96086, May 2011)

Table 12 Error Codes — Part Code 0210 (continued)
Failure
Level
Severity
Level
Recommended ActionError MessageError
Number
Part
Code
5ETo disable the specified user,
click [OK]. Otherwise, click
[Cancel].
Are you sure you want to
disable the specified user?
656370210
5ETo enable the specified user,
click [OK]. Otherwise, click
[Cancel].
Are you sure you want to
enable the specified user?
656380210
Table 13 Error Codes — Part Code 0290
Failure
Level
Severity
Level
Recommended ActionError MessageError
Number
Part
Code
Specify the user ID.Enter the user ID.50100290
5WInput the correct user name
or password.
The user ID or password is
invalid.
50140290
You can specify the user ID
with up to 16 characters.
Enter the user ID with up to
16 alphanumeric characters.
50150290
5WCorrect the specified content,
and retry.
The Password is invalid.
Access Denied.
50160290
Input the correct password.The password is invalid.50200290
Input the correct password.The password is invalid.50210290
Input the correct password.The new password is invalid.50220290
Remove the invalid characters
and retry.
You cannot use the following
characters: " # & = + \ , ; :
* ? < > | /
50300290
Remove the multi-byte
characters and retry.
You cannot use multi-byte
characters.
50400290
Register the other user ID.The user ID is already
registered.
50500290
You cannot register anymore.The number of user accounts
exceeds the maximum.
50600290
Input the password again.The current password is
invalid.
50700290
Specify the correct password.The password is invalid.50800290
Reply to this message.The RMI time-out period is too
short compared to the time to
keep the RMI object.
50900290
Reply to this message.The Polling period is too long
compared to the time to keep
the RMI object.
51000290
Reply to this message.Specify at least 1 polling
method.
51010290
Check the settings.The Status Window Hidden
Option is specified but [NO]
is not selected for the Polling
period for checking obstacles
Option. Are you sure you
want to register the
parameters?
51020290
Remote Web Console Error Codes 59