HP StorageWorks XP24000/XP20000 Remote Web Console Error Codes (AE131-96086, May 2011)

Table 9 Error Codes — Part Code 0105 (continued)
Failure
Level
Severity
Level
Recommended ActionError MessageError
Number
Part
Code
6EDelete a logical path, and
then make configuration
changes.
You cannot make changes
because a logical path to the
volume still remains.
65350105
6ERelease the LUSE volume,
and then request
configuration changes again.
The target volume cannot be
changed due to its LUSE
configuration.
65360105
3ERetry the operation. If this
problem persists, call HP
technical support.
An error occurred during SVP
processing. If this problem
persists, call HP technical
support.
80000105
3ERetry the operation. If this
problem persists, call HP
technical support.
An error occurred during SVP
processing. If this problem
persists, call HP technical
support.
80020105
3ECheck whether the
DKCMAIN microcode version
and the SVP microcode
version are mismatched.
This function is not supported.81020105
6ERestore more than one path
to the external volume, and
then perform the operation of
the external volume.
The operation of the external
volume has been failed
because all the paths to the
external volume are blocked.
89790105
6EThe licensed capacity for a
program product will become
insufficient because of a
configuration change.
Add licensed capacity from
the License Key window.
If you do not add licensed
capacity in 10 days, the
program product will be
unavailable.
The licensed capacity for a
program product will become
insufficient because of a
configuration change.
Add licensed capacity from
the License Key window.
If you do not add licensed
capacity in 10 days, the
program product will be
unavailable.
565070105
6EIncrease the licensed
capacity for the program
products that do not have
sufficient licensed capacity,
and then retry the operation.
The licensed capacity of
some program products will
be insufficient because of the
Add LU operation.
565210105
6EResynchronize or release the
pair definition of the XP
Snapshot pair using the pool
volume to be maintained,
and then retry the operation.
The specified operation
cannot be performed,
because the XP Snapshot pair
using the pool volumes to be
maintained is in PSUS status
or being restored.
Please resynchronize the pair
or release the pair definition,
and then retry the operation.
586230105
50 Remote Web Console for Storage System Messages and Error Codes