HP StorageWorks XP24000/XP20000 Remote Web Console Error Codes (AE131-96086, May 2011)

Table 87 Error Codes — Part Code 9605 (continued)
Failure
Level
Severity
Level
Recommended ActionError MessageError
Number
Part
Code
5ERetry the operation after the
logical volume has recovered
from the blocked status or
after the LDEV has been
formatted or shredded.
The specified logical volume
is blocked, or the LDEV is
being formatted or shredded.
584489605
5EDo one of the following:
1. Execute the Volume
Initialize operation on the
external group to which
the logical volume belongs
in the Customized Volume
window, and create a
volume having the same
capacity as the external
volume.
2. Execute the Make Volume
operation on the external
group to which the logical
volume belongs in the
Customized Volume
window, and create a
volume having the same
capacity as the external
volume.
The capacity of the logical
volume is not the same as
that of the external volume
with which the logical volume
is mapped.
584499605
5EIf this problem persists, call
HP technical support.
An error occurred during SVP
processing. If this problem
persists, call HP technical
support.
584509605
5ECheck the logical volume
configuration, and then retry
the operation.
This logical volume cannot be
selected because it is used as
a volume for System Disk.
680029605
Table 88 Error Codes — Part Code 9610
Failure
Level
Severity
Level
Recommended ActionError MessageError
Number
Part
Code
2EIf this problem persists, call
HP technical support.
An error occurred during
processing. If this problem
persists, call HP technical
support.
70609610
3EIf this problem persists, call
HP technical support.
There is an invalid value in
the Data Retention Utility
information.
74429610
6WMount volumes, and then
retry the operation.
There is no valid volume.81129610
0iTo continue processing, click
[OK]. To stop processing,
click [Cancel].
The value that is under setup
is not reflected yet. Do you
want to continue the
operation?
91079610
0iTo change the mode, click
[OK]. Otherwise, click
[Cancel].
Do you want to change the
expiration lock mode?
93629610
0iCorrect the retention term,
and then retry the operation.
The specified retention term
exceeds the maximum.
93639610
Remote Web Console Error Codes 441