HP StorageWorks XP24000/XP20000 Remote Web Console Error Codes (AE131-96086, May 2011)

Table 87 Error Codes — Part Code 9605 (continued)
Failure
Level
Severity
Level
Recommended ActionError MessageError
Number
Part
Code
5ESelect another volume.The attribute of the virtual
volume of the XP Snapshot
cannot be changed.
584139605
5ESelect another volume.The attribute of the P-VOL or
the S-VOL of the XP Snapshot
cannot be changed.
584149605
5ESelect another volume.The VMA of the pool volume
cannot be changed.
584159605
5ESelect another volume.The VMA of the P-VOL or the
S-VOL of the XP Snapshot
cannot be changed.
584179605
5ERelease or suspend the XP
Continuous Access Journal
volume.
The access attribute cannot
be changed, because the
status of the specified XP
Continuous Access Journal
volume is in “PAIR” or in
“COPY”.
584189605
5ESuspend the remote copy
pair or delete the pair, and
then retry the operation.
The access attribute of a
primary or a secondary
volume for remote copy
cannot be changed when
VMA is set.
584199605
5ERelease the LUSE volume, or
set VMA for a different
logical volume.
VMA cannot be set for the
specified logical volume,
because the specified logical
volume is a LUSE volume.
584209605
5EIf this problem persists, call
HP technical support.
An error occurred during SVP
processing. If this problem
persists, call HP technical
support.
584229605
5EIf this problem persists, call
HP technical support.
An error occurred during SVP
processing. If this problem
persists, call HP technical
support.
584239605
5ERestore the logical volume.The specified logical volume
is blocked.
584249605
5ERelease the journal volume of
XP Continuous Access
Journal, or set up the VMA
on another logical volume.
A VMA cannot be set up on
this logical volume because
the logical volume is being
used as a journal volume of
XP Continuous Access
Journal.
584259605
5ESet the extent to another
logical volume.
Extents are already set to the
specified logical volume.
584269605
5ESet the VMA.VMA is not set to the
specified logical volume.
584279605
5ESet the extents.Extents are not set to the
specified logical volume.
584289605
5EMake the setting to another
logical volume.
A retention term is set to the
specified logical volume.
584299605
Remote Web Console Error Codes 439