HP StorageWorks XP24000/XP20000 Remote Web Console Error Codes (AE131-96086, May 2011)

Table 87 Error Codes — Part Code 9605 (continued)
Failure
Level
Severity
Level
Recommended ActionError MessageError
Number
Part
Code
5ESpecify an open-system
volume.
The specified logical volume
does not exist.
81209605
5ERetry a little later.This logical volume is busy.81229605
5ECheck whether the
DKCMAIN microcode version
and the SVP microcode
version are mismatched.
This function is not supported.81239605
5ESpecify an open-system
volume.
This logical volume is a
mainframe volume.
81249605
5EReview LDEV information,
and then retry.
The attribute of the logical
volume has been changed by
RAID Manager.
81259605
5ECheck the logical volume
configuration, and then retry
the operation.
This logical volume is
configured as a command
device.
81269605
5EIf this problem persists, call
HP technical support.
A parameter error occurred.81289605
5EIf this problem persists, call
HP technical support.
This error code is not
registered.
81329605
5EYou cannot change the
attribute of this logical device
to Read/Write. Call HP
technical support To change
the attribute.
You cannot change the
attribute of this logical volume
to Read/Write. Call HP
technical support if you want
to change the attribute.
81349605
5ECheck the logical volume
configuration, and then retry
the operation.
This logical volume is already
used as an S-VOL for XP
Continuous Access or
Business Copy.
81359605
5EThe currently licensed
capacity is insufficient. To
increase the licensed
capacity, buy a new license
key.
The command was rejected,
because the licensed capacity
was exceeded.
81369605
5EThe Reserved setting of the
specified device cannot be
released. To release the
Reserved setting, call HP
technical support.
The Reserved setting of the
specified volume cannot be
released. To release the
Reserved setting, call HP
technical support.
81389605
5ECheck the volume, and then
retry the operation.
The specified volume is a
P-VOL for Business Copy.
81399605
5ECheck the volume, and then
retry the operation.
This logical volume cannot be
selected because it is used as
a reserve volume for Auto
LUN.
81419605
5ECheck the logical volume,
and then retry the operation.
You cannot select this logical
volume because it is used as
a XP Continuous Access
Journal volume.
81429605
Remote Web Console Error Codes 437