HP StorageWorks XP24000/XP20000 Remote Web Console Error Codes (AE131-96086, May 2011)

Table 85 Error Codes — Part Code 9205 (continued)
Failure
Level
Severity
Level
Recommended ActionError MessageError
Number
Part
Code
5ECheck the contents of the
Volume Retention Manager
spreadsheet.
The number of digits is
invalid.
660089205
5ECheck the contents of the
Volume Retention Manager
spreadsheet.
The entered value is outside
the setting range.
660099205
5ECheck the contents of the
Volume Retention Manager
spreadsheet.
The format is invalid.660109205
5ECheck the contents of the
Volume Retention Manager
spreadsheet.
An unnecessary item is
included in the entered
definition.
660119205
5ECheck the contents of the
Volume Retention Manager
spreadsheet.
The same definition exists in
the spreadsheet file. (The
combination of a CU number
and an LDEV number is
repeated.)
660129205
5EEnter a correct attribute in the
[Attribute] of the spreadsheet
(enter Read/Write, Read
Only, or Protect).
The access attribute set in the
[Attribute] of the spreadsheet
is incorrect (an attribute other
than Read/Write, Read Only,
or Protect is entered).
660139205
5ECheck the logical volume
configuration, and then retry
the operation.
This logical volume cannot be
selected because it is used as
a volume for System Disk.
680029205
Table 86 Error Codes — Part Code 9210
Failure
Level
Severity
Level
Recommended ActionError MessageError
Number
Part
Code
2EIf this problem persists, call
HP technical support.
An error occurred during
processing. If this problem
persists, call HP technical
support.
70609210
3EIf this problem persists, call
HP technical support.
There is an invalid value in
the Volume Retention
Manager information.
74429210
3EIf this problem persists, call
HP technical support.
The VTOC information
contains one or more invalid
values.
74439210
6WMount volumes, and then
retry the operation.
There is no valid volume.81129210
0iTo continue processing, click
[OK]. To stop processing,
click [Cancel].
The value that is under setup
is not reflected yet. Do you
want to continue the
operation?
91079210
Remote Web Console Error Codes 435