HP StorageWorks XP24000/XP20000 Remote Web Console Error Codes (AE131-96086, May 2011)
Table 8 Error Codes — Part Code 0010 (continued)
Failure
Level
Severity
Level
Recommended ActionError MessageError
Number
Part
Code
1EYou cannot connect to the
SVP because of factors, such
as a network error or SVP
error. Check the IP address.
If the IP address is correct,
close the browser (also close
the browser of the storage
list), and log in again after
waiting a while. If the
problem persists, call HP
technical support.
The version of Remote Web
Console may not match the
version of the destination
SVP. Clear the cache of JRE
and the browser, restart the
browser, and then retry the
processing. Remote Web
Console is downloaded over
your network and then
executed. If you use a proxy
server, the old version of the
program may remain in the
cache of the proxy and may
be downloaded and
executed. If this problem
persists contact your network
administrator. If your network
does not have any problem
and this problem persists, call
HP technical support.
A network error occurred.
The probable causes are:
• The SVP was not ready.
• An error occurred in the
SVP.
• A timeout error occurred
during communication
with the SVP.
60270010
2EFailed to connect from the
server due to a network error
etc. Check the IP address.
A network error occurred.60600010
2EYou cannot connect to the
SVP because of the factors,
such as a network error or
SVP error. Check the IP
address. If the IP address is
correct, close the browser
(also close the browser of the
storage list), and log in again
after waiting a while. If the
problem persists, call HP
technical support.
An error occurred while
connecting to the SVP.
60700010
5ECall HP technical support.An error occurred while
writing to a file.
60940010
2EDelete the cache file of the
browser, restart the browser
and log on again.
If this problem persists call HP
technical support.
A client processing error
occurred.
70600010
2EAn error occurred. If this
problem persists, call HP
technical support.
An error occurred during
processing. If this problem
persists call HP technical
support.
74400010
Remote Web Console Error Codes 43