HP StorageWorks XP24000/XP20000 Remote Web Console Error Codes (AE131-96086, May 2011)

Table 76 Error Codes — Part Code 8510
Failure
Level
Severity
Level
Recommended ActionError MessageError
Number
Part
Code
0WSpecify what you want to
register, and retry the
operation.
The display information has
not been changed.
50308510
2EIf this problem persists, call
HP technical support.
An error occurred in client
logic.
70608510
2EIf this problem persists, call
HP technical support.
An error occurred in client
logic.
73018510
2EIf this problem persists, call
HP technical support.
An error occurred in client
logic.
73028510
2EIf the same problem persists
despite retrying, call HP
technical support.
An error occurred. If this
problem persists, call HP
technical support.
74408510
2ETo cancel, click [OK].Do you want to cancel?91018510
2EClick [OK] to execute the
operation.
Do you want to apply?91028510
0WChange the CLPR name.The CLPR name already
exists. The CLPR name will
return to the name that is
displayed before you have
changed.
552358510
0WChange the settings.The value set for the number
of Cache Residency Manager
areas is outside the valid
range. The value will return
to the one set before.
552368510
0EChange the SLPR name.The SLPR name already
exists. The SLPR name will
return to the name that is
displayed before you have
changed.
552378510
0ECheck the settings and retry
the operation.
Some of the selected ports
cannot migrate to the other
SLPR. Change the settings.
552388510
0ECheck the settings and retry
the operation.
Some of the selected parity
groups cannot migrate to the
other SLPR. Change the
settings.
552408510
0WSelect another parity group,
and then retry the operation.
The concatenated parity
group cannot be set across
multiple CLPRs. Select another
parity group, and then retry
the operation.
552618510
0WApply the tentative settings
with no parity groups to the
CLPR that you have created,
and then migrate the parity
group.
The Parity Group cannot be
migrated to the CLPR that you
newly created. Apply the
tentative settings with no
parity groups to the CLPR that
you have created, and then
migrate the parity group.
552628510
Remote Web Console Error Codes 421