HP StorageWorks XP24000/XP20000 Remote Web Console Error Codes (AE131-96086, May 2011)

Table 74 Error Codes — Part Code 8505 (continued)
Failure
Level
Severity
Level
Recommended ActionError MessageError
Number
Part
Code
5ESpecify the correct port name
(port number), and then retry
the operation. If this problem
persists, call HP technical
support.
The specified port name (port
number) is invalid.
550268505
5ECorrect the settings of the
cache size, and then retry the
operation. If this problem
persists, call HP technical
support.
The cache size is incorrect.
CLPR No:%s(SLPR No:%s)
550278505
5ESet the cache size to be
equal to or greater than the
required minimum value, and
then retry the operation. If this
problem persists, call HP
technical support.
The specified cache size
excluding the Cache
Residency Manager size is
less than the minimum
required.
CLPR No:%s(SLPR No:%s)
550288505
5ESet the cache size correctly,
and then retry the operation.
If this problem persists, call
HP technical support.
The total cache size is
incorrect.
550298505
5EAssign a different port name
(port number), and then retry
the operation. If this problem
persists, call HP technical
support.
The same port is already
registered in a different SLPR.
550338505
5EInstall the program product.This function is not available.
Disk/Cache Partition is
required to create SLPR or
CLPR.
552288505
4EContact the storage
administrator. (To the storage
administrator: Reconfigure the
login information.) If this
problem persists, call HP
technical support.
The login information for the
partition management
function has been initialized
due to detection of conflicting
information. Contact the
storage administrator. (To the
storage administrator:
Reconfigure the login
information.)
565018505
4WThe operation to set the
maximum number of
connections has been
cancelled because an attempt
was made to specify a value
that is less than the number
of users who are currently
connected. Check the
maximum permissible number
of connections.
The operation to set the
maximum number of
connections has been
cancelled because an attempt
has been made to specify this
value to less than the number
of users who are currently
connected. Check the
maximum permissible number
of connections.
565028505
3ESelect another window. To
set this function, contact the
storage administrator.
This function cannot be used
by the storage partition
administrator.
565248505
418 Remote Web Console for Storage System Messages and Error Codes