HP StorageWorks XP24000/XP20000 Remote Web Console Error Codes (AE131-96086, May 2011)

Table 74 Error Codes — Part Code 8505 (continued)
Failure
Level
Severity
Level
Recommended ActionError MessageError
Number
Part
Code
5ESet the correct value for the
maximum number of
connections to the SLPR, and
then retry the operation. If this
problem persists, call HP
technical support.
The value set as the maximum
number of connections to
each SLPR is invalid. SLPR
No:%s
550168505
5ESet the correct value for the
total of the maximum
allowable user connections,
and then retry the operation.
If this problem persists, call
HP technical support.
The total of the values
registered as the maximum
number of users that can
connect to each SLPR exceeds
the value set as the maximum
number of connections to the
subsystem.
550178505
5EDelete the SSIDs that are no
longer necessary, and then
retry the operation. If this
problem persists, call HP
technical support.
The number of SSIDs exceeds
the maximum that can be
registered.
550188505
5ECorrect the SSID setting, and
then retry the operation. If this
problem persists, call HP
technical support.
An invalid SSID was
detected.
550198505
5EAssign a different SSID, and
then retry the operation. If this
problem persists, call HP
technical support.
The same SSID is already
registered in a different SLPR.
550208505
5ESpecify the correct CU
number, and then retry the
operation. If this problem
persists, call HP technical
support.
The specified CU number is
invalid.
550218505
5ECorrect the CLPR settings,
and then retry the operation.
If this problem persists, call
HP technical support.
An attempt has been made
to either register newly a
CLPR that is already
registered, or delete a CLPR
that is not registered.
550228505
5ECorrect the SLPR settings, and
then retry the operation. If this
problem persists, call HP
technical support.
An attempt has been made
to either register newly a
SLPR that is already
registered, or delete a SLPR
that is not registered.
550238505
5ESpecify a different parity
group, and then retry the
operation. If the same
problem persists despite
retrying, call HP technical
support.
Some parity groups are
already registered in a
different CLPR.
550248505
5ECorrect the settings of parity
group, and retry the
operation. If the same
problem persists despite
retrying, call HP technical
support.
The incorrect settings of parity
group are contained.
550258505
Remote Web Console Error Codes 417