HP StorageWorks XP24000/XP20000 Remote Web Console Error Codes (AE131-96086, May 2011)

Table 70 Error Codes — Part Code 8111 (continued)
Failure
Level
Severity
Level
Recommended ActionError MessageError
Number
Part
Code
1EModify mode released due
to inactivity. Restart Modify
mode (press the
mode-switching button again)
to continue.
Modify mode released due
to inactivity. Restart Modify
mode (press the
mode-switching button again)
to continue.
56328111
1ECorrect the specified
contents, and retry the
operation.
The file path should be from
1 to 255 characters.
56338111
1EIf this problem persists, call
HP technical support.
An error occurred. If this
problem persists call HP
technical support.
56348111
1ECorrect the setting, and retry
the operation.
The file specified by [File
Name on Client] is
write-protected.
57748111
1EIf the error occurs after
retrying, call HP technical
support.
A file access error occurred.57758111
Table 71 Error Codes — Part Code 8210
Failure
Level
Severity
Level
Recommended ActionError MessageError
Number
Part
Code
2EIf this problem persists, call
HP technical support.
An error occurred during
processing. If this problem
persists, call HP technical
support.
74408210
Table 72 Error Codes — Part Code 8305
Failure
Level
Severity
Level
Recommended ActionError MessageError
Number
Part
Code
3ESelect another window. To
set this function, contact the
storage administrator.
This function cannot be used
by the storage partition
administrator.
565248305
Table 73 Error Codes — Part Code 8310
Failure
Level
Severity
Level
Recommended ActionError MessageError
Number
Part
Code
0iCheck the specified file, and
then retry the operation.
The specified file does not
exist.
550408310
0iCheck the specified
password, and then retry the
operation.
The specified password is
invalid.
550418310
0iCorrect the number of ports
set to be available by the
On-Demand function, and
then retry the operation.
The number of ports set to be
available by the On-Demand
function exceeds the number
of ports installed.
550428310
0iRelease the port’s path
setting, and then retry the
operation.
The selected port cannot be
disabled by the On-Demand
function because it is
path-defined.
551118310
414 Remote Web Console for Storage System Messages and Error Codes