HP StorageWorks XP24000/XP20000 Remote Web Console Error Codes (AE131-96086, May 2011)

Table 68 Error Codes — Part Code 8107
Failure
Level
Severity
Level
Recommended ActionError MessageError
Number
Part
Code
6ECheck the setting.The number of lines exceeds
the maximum number of lines
of a spreadsheet.
56418107
6ECheck the setting.The number of characters
exceeds the maximum
number of characters of a
spreadsheet.
56428107
6EIf the error occurs after
retrying, call HP technical
support.
A time-out error occurred.
Wait for the SVP to reboot,
and then retry the operation.
56438107
Table 69 Error Codes — Part Code 8110
Failure
Level
Severity
Level
Recommended ActionError MessageError
Number
Part
Code
5WWait about three minutes,
and then retry.
Starting file transfer client.50018110
5EThe acquired data is
inaccurate. If this problem
persists, call HP technical
support.
Inaccurate data was
acquired.
50028110
5ERetry the operation.Failed to get the data.50038110
5ECorrect the first tag.The first tag is invalid.50048110
1ECorrect the specified
contents, and retry the
operation.
The file name should be from
1 to 32 characters.
56278110
1ECorrect the specified
contents, and retry the
operation.
Following characters cannot
be used for the file name: "
\ / , : ; * ? < > | and space.
56288110
1ECorrect the specified
contents, and retry the
operation.
The file specified by [File
Name on Client] does not
exist.
56298110
1ECorrect the specified
contents, and retry the
operation.
The file specified by [File
Name on Client] cannot be
read.
56308110
1ECorrect the specified
contents, and retry the
operation.
The object specified by [File
Name on Client] is not a file.
56318110
1ECorrect the specified
contents, and retry the
operation.
The file path should be from
1 to 255 characters.
56338110
2EIf the same problem persists
despite retrying, call HP
technical support.
An error occurred during
processing. If this problem
persists, call HP technical
support.
56348110
7EModify mode released due
to inactivity. Restart Modify
mode (press the
mode-switching button again)
to continue.
Modify mode released due
to inactivity. Restart Modify
mode (press the
mode-switching button again)
to continue.
57728110
412 Remote Web Console for Storage System Messages and Error Codes