HP StorageWorks XP24000/XP20000 Remote Web Console Error Codes (AE131-96086, May 2011)

Table 67 Error Codes — Part Code 8105 (continued)
Failure
Level
Severity
Level
Recommended ActionError MessageError
Number
Part
Code
0WCorrect the WWN.The same WWN is already
registered.
57578105
0WCorrect the group ID.No name can be added to
the group ID (00).
57588105
0WCorrect the name.The same name is already
registered.
57598105
0WCorrect the WWN.The WWN does not exist.57618105
0WCorrect the name.The name does not exist.57628105
0WAdd the LUN to another
group or another port.
The number of LUN cannot
exceed 512 per port or 256
per host group.
57648105
0WCorrect the LUN.The LUN is already used.57658105
0WCorrect the CU and LDEV.The specified CU:LDEV is
invalid.
57668105
0WCorrect the LUN.The LUN does not exist.57678105
0WCorrect the LUN.There is a difference between
the current LUN and the
specified LUN.
57688105
0WCorrect the group ID.The group cannot be added.57698105
0WSet the port attribute to target
in advance.
The port cannot be changed
because the port is an
initiator port.
57708105
0WThe PCB mode value is
invalid. Specify a correct
value.
The setting cannot be
performed, because an
invalid PCB mode is set to the
specified CHA.
57718105
0WCorrect the CU and LDEV.The system LU cannot be
used.
57858105
0WCorrect the name of port.The path can be defined only
for the A, E, J or N port.
57868105
0WCorrect the CU and LDEV.The intermediate volume
cannot be specified as a
command device.
57898105
0WIf nothing changes despite
retrying, call HP technical
support.
A program error occurred
under internal process.
57908105
2EIf this problem persists, call
HP technical support.
An error occurred during SVP
processing. If this problem
persists, call HP technical
support.
60128105
3WIf the same problem persists
despite retrying, call HP
technical support.
The SVP is busy. Please wait
for a while, and then retry the
operation.
60238105
6ERetry the operation a little
later.
A command was double
started.
65138105
410 Remote Web Console for Storage System Messages and Error Codes