HP StorageWorks XP24000/XP20000 Remote Web Console Error Codes (AE131-96086, May 2011)

Table 67 Error Codes — Part Code 8105 (continued)
Failure
Level
Severity
Level
Recommended ActionError MessageError
Number
Part
Code
0WCorrect the invalid
parameter.
The parameter is invalid.57218105
0WWrite one definition only in
each tag.
Duplicate definition error.57308105
0WCorrect the current
information.
The current information is
invalid.
57318105
0WCorrect the name of the CHA.There is a difference between
the current CHA and the
specified CHA.
57408105
0WCorrect the name of the port.There is a difference between
the current port and the
specified port.
57418105
0WThe Channel Speed value is
invalid. Specify a correct
value.
The setting cannot be
performed, because an
invalid Channel Speed value
is set to the specified port.
57428105
0WCorrect the CU and LDEV.There is a difference between
the current CU:LDEV and the
specified CU:LDEV.
57438105
0WTurn on the command device
switch.
The command device security
switch cannot be turned on
because this is not command
device.
57448105
0WTurn on the security switch on
this port.
The security switch on the
port is off. Turn on the switch.
57458105
0WCorrect the group ID.The group ID is invalid.57468105
0WCorrect the name of the
group.
The group cannot be added.
Change the name of the
group.
57478105
0WCorrect the group ID.The group ID does not exist.57488105
0WCorrect the group ID.The same group ID is already
registered.
57498105
0WCorrect the group name.The same group name is
already registered.
57508105
0WCorrect the group ID.The group ID does not exist.57518105
0WCorrect the group name.The group name does not
exist.
57528105
0WCorrect the port ID and the
group ID.
There is a difference between
the current port ID/group ID
and the specified one.
57538105
0WCorrect the CU and LDEV.The intermediate volume
cannot be specified as a
command device.
57548105
0WTurn on the security switch on
this port.
The security switch on the
port remains off. Turn the
switch on.
57558105
0WAdd the WWN to another
port.
The number of WWN cannot
exceed 255 per port.
57568105
Remote Web Console Error Codes 409