HP StorageWorks XP24000/XP20000 Remote Web Console Error Codes (AE131-96086, May 2011)

Table 67 Error Codes — Part Code 8105 (continued)
Failure
Level
Severity
Level
Recommended ActionError MessageError
Number
Part
Code
6EA communication error
occurs. If the error occurs
after retrying, call HP
technical support.
An error occurred while
connecting to the subsystem.
Wait for a while, and then
retry the operation.
20158105
6EThe host is mounted or the
device is reserved. Unmount
the host and cancel
reservation of the device. For
AIX hosts, unmount the host
and execute the varyoffvg
command.
Processing is disabled
because the host is mounted
or the device is reserved.
20828105
2ECheck the DKC status and the
current status of the
configuration setting. If
necessary, re-execute the
setting operation.
The subsystem status is
invalid. Call HP technical
support.
20838105
2ECheck the DKC status and the
current status of the
configuration setting. If
necessary, re-execute the
setting operation.
The subsystem status is
invalid. Call HP technical
support.
20848105
6EStop executing I/Os, and
then retry the operation.
The host specified by the
WWN is performing I/O
operations.
20978105
6EDelete or suspend all pairs to
which the journal volumes
belong.
Devices to be maintained
include journal volumes.
Delete or suspend all pairs to
which the journal volumes
belong.
22048105
6EDelete all pairs to which the
journal volumes belong.
Devices to be maintained
include journal volumes.
Delete all pairs to which the
journal volumes belong.
22058105
5WRelease the reserved attribute
of the target volume by using
Data Retention Utility.
No settings can be made
because of a volume reserved
for RAID Manager.
25048105
6ECall HP technical support and
finish adding volumes.
No path can be set to the
specified volume because the
addition of volumes is not
finished.
25108105
6ERelease the pair definition or
delete command devices
defined by Business
Continuity Manager, and
then retry the operation.
One of the following is
defined: a XP Continuous
Access pair, a XP Continuous
Access Journal pair, or a
Universal Replicator for
Mainframe pair.
Alternatively, command
devices defined by Business
Continuity Manager are
included.
Release the pair definition or
delete command devices
defined by Business
Continuity Manager, and
then retry the operation.
25158105
406 Remote Web Console for Storage System Messages and Error Codes