HP StorageWorks XP24000/XP20000 Remote Web Console Error Codes (AE131-96086, May 2011)

Table 67 Error Codes — Part Code 8105 (continued)
Failure
Level
Severity
Level
Recommended ActionError MessageError
Number
Part
Code
6ECorrect the settings, and then
retry the operation.
The specified volume is a
remote command device, and
therefore the command
device setting or the
command device security
setting cannot be set or
released.
19128105
6EDelete the external volume
that is mapped to the external
port to be operated, and then
retry the operation.
An external volume is
mapped to the external port
to be operated. Delete the
external volume that is
mapped to the external port
to be operated, and then
retry the operation.
19188105
6ECheck the volume, and then
retry the operation.
The specified volume is not a
LUSE volume.
19218105
6ECheck the setting.The path cannot be set to the
specified volume, because
the volume is being used as
a quorum disk.
19268105
6ECheck the setting.The specified volume cannot
be set as a command device,
because it is being used as a
quorum disk.
19278105
2EUse the SVP to check if the
DKC is in the normal status,
and then retry. If the same
problem persists despite
retrying, call HP technical
support.
An error occurred during SVP
processing. If this problem
persists, call HP technical
support.
20038105
2EIf this problem persists, call
HP technical support.
An error occurred during SVP
processing. If this problem
persists, call HP technical
support.
20058105
2EIf this problem persists, call
HP technical support.
An error occurred during SVP
processing. If this problem
persists, call HP technical
support.
20098105
6ECheck if I/O from the host to
target path/volume does not
occur.
The LDEV is used by the
HOST, or an error occurred
in the server procedure.
20108105
6ECheck the status of the disk
storage system (for example,
the storage system is blocked,
the shared memory is
inconsistent, or some other
problem occurs). If this
problem persists, call HP
technical support.
The status of the storage
system requires maintenance
(for example, the subsystem
is blocked, the shared
memory is inconsistent, or
some other problem occurs).
Call HP technical support.
20118105
2EIf this problem persists, call
HP technical support.
An error occurred during SVP
processing. If this problem
persists, call HP technical
support.
20138105
Remote Web Console Error Codes 405