HP StorageWorks XP24000/XP20000 Remote Web Console Error Codes (AE131-96086, May 2011)

Table 67 Error Codes — Part Code 8105 (continued)
Failure
Level
Severity
Level
Recommended ActionError MessageError
Number
Part
Code
2EFibre topology information is
invalid. (The specified value
is not in the specification.)
The error does not occur
normally because it is
guarded in the screen. In the
unlikely event that this error
occurs, contact HP technical
support.
An error occurred. If this
problem persists, call HP
technical support.
10248105
6EThe configuration information
has been already changed.
Check the settings, and
request the setting of the
configuration information
again.
The specified LU path does
not exist.
10258105
6EThe configuration information
has been already changed.
Check the settings, and
request the setting of the
configuration information
again.
The number of volumes you
intend to combine into a
LUSE volume exceeds the
maximum.
10288105
2EIf this problem persists, call
HP technical support.
An error occurred during SVP
processing. If this problem
persists, call HP technical
support.
10298105
6EThe configuration information
has been already changed.
Check the settings, and
request the setting of the
configuration information
again.
The following volumes cannot
be specified when you
change expanded LU
configurations:
• Volumes reserved by Auto
LUN
10508105
2EYou are trying to perform
LUN Security operation for
non-Fibre port. The error does
not occur normally because
it is guarded in the screen. In
the unlikely event that this
error occurs, contact HP
technical support.
LUN Manager function (LUN
security) settings are given to
the ports other than Fibre
ports.
Check the setting.
10598105
2EYou are trying to perform
LUN Security operation for a
port where LUN Security
function is invalid. The error
does not occur normally
because it is guarded in the
screen. In the unlikely event
that this error occurs, contact
HP technical support.
An error occurred. If this
problem persists, call HP
technical support.
10618105
6ECorrect the specified
contents, and request the
setting of the configuration
information again.
The specified WWN is
already in use. Specify
another WWN.
10638105
398 Remote Web Console for Storage System Messages and Error Codes