HP StorageWorks XP24000/XP20000 Remote Web Console Error Codes (AE131-96086, May 2011)

Table 66 Error Codes — Part Code 8005 (continued)
Failure
Level
Severity
Level
Recommended ActionError MessageError
Number
Part
Code
6EIf this problem persists, call
HP technical support.
An error occurred while
connecting to the subsystem.
Wait for a while, and then
retry the operation.
585748005
6EIf this problem persists, call
HP technical support.
An error occurred while
connecting to the subsystem.
Wait for a while, and then
retry the operation.
585758005
3EIf this problem persists, call
HP technical support.
A communication time-out
error occurred in the disk
subsystem. Wait for a while,
and then retry the operation.
585768005
6ECheck the password and the
DKA Encryption License Key.
The combination of the
password and the DKA
Encryption License Key do not
match.
657278005
6EConfirm the setting status of
the current system disk
option. For the functions that
could not be set, add a
system disk or restore the
blocked system disk, and then
retry the operation.
There are functions that
cannot change the system
disk option due to one of the
following reasons:
• The system disk capacity
is insufficient.
• The system disk is
blocked.
Confirm the setting status of
the current system disk
option.
657838005
3EContact the application
program distributor.
A parity group, to which 17
or more VDEVs are allocated,
exists.
The application program you
are using may not support
this microprogram version.
668258005
3EAn error occurred on the
DKC side. If this problem
persists, call HP technical
support.
An error occurred on the
DKC side. If this problem
persists, call HP technical
support.
687618005
6EInstall the required program
product.
This functionality is not
available. DKA Encryption
License Key is required.
687628005
6EInstall the Encryption DKA.This function cannot be used
because the encryption
function is not supported.
687658005
6EUse the correct DKA
Encryption License Key.
The serial number of the DKA
Encryption License Key does
not match.
687668005
6ECheck the specified parity
group.
The specified parity group is
not mounted.
687858005
6ECheck the status of the
specified parity group.
The specified parity group is
not blocked.
687868005
Remote Web Console Error Codes 395