HP StorageWorks XP24000/XP20000 Remote Web Console Error Codes (AE131-96086, May 2011)

Table 66 Error Codes — Part Code 8005 (continued)
Failure
Level
Severity
Level
Recommended ActionError MessageError
Number
Part
Code
6ERetry the same operation
several times. If the same
error occurs, call HP technical
support.
An error occurred while
connecting to the subsystem.
Wait for a while, and then
retry the operation.
80018005
6ERetry the same operation
several times. If the same
error occurs, call HP technical
support.
An error occurred while
connecting to the subsystem.
Wait for a while, and then
retry the operation.
81008005
6ECheck the settings, and then
retry the operation.
The total of Cache Residency
Manager size of the CLPRs
and the total of all Cache
Residency Manager size in
the subsystem are not equal.
550218005
6ECheck the settings, and then
retry the operation.
The total of Cache Residency
Manager capacity of the
CLPRs and the total of all
Cache Residency Manager
capacity in the subsystem are
not equal.
552438005
6ECheck the settings, and then
retry the operation.
The Cache Residency
Manager size set for the
CLPR exceeds the maximum
available Cache Residency
Manager size.
CLPR No:%s
552448005
6ECheck the settings, and then
retry the operation.
The number of Cache
Residency Manager areas set
for the CLPR exceeds the
maximum available number
of Cache Residency Manager
areas.
CLPR No:%s
552458005
6ECheck the settings, and then
retry the operation.
The total number of Cache
Residency Manager areas set
for the CLPRs and the
maximum number of the
Cache Residency Manager
areas in the subsystem are
not equal.
552468005
6ECheck the settings, and then
retry the operation.
The Cache Residency
Manager size set for the
CLPR is not a multiple of 512
MB.
CLPR No:%s
552478005
6ECheck the settings, and then
retry the operation.
The mainframe volume is set
for the SLPRs other than SLPR
0.
CU:LDEV=%s:%s
552518005
Remote Web Console Error Codes 393