HP StorageWorks XP24000/XP20000 Remote Web Console Error Codes (AE131-96086, May 2011)

Table 65 Error Codes — Part Code 7110 (continued)
Failure
Level
Severity
Level
Recommended ActionError MessageError
Number
Part
Code
0WApply the data in the Preview
List. To stop the transaction,
click [OK] and continue the
operation.
The data has been changed.
If you select another tab
(page), the settings will be
discarded. Are you sure you
want to continue?
51217110
0WGo on to the next operation.No data has been changed.51227110
0WCheck the password.The password is invalid.51237110
0WMultiple volumes cannot be
processed in the operation.
Process one volume at a time.
You cannot select more than
one operation at a time.
51247110
0WSelect the target volume.No target volume is selected.51257110
0iYou cannot create a pair for
the specified S-VOL. Delete
the created pair, and retry
the operation.
The number of pairs exceeds
the maximum.
65047110
0ECall HP technical support.Unregistered error code.73107110
0WWait a few seconds, and
retry the operation. If the
error occurs after retrying,
call HP technical support.
The settings could not be
applied.
73117110
0ECall HP technical support.The password could not be
acquired.
73127110
0ECall HP technical support.Error details not available.73137110
2EIf this problem persists, call
HP technical support.
An error occurred during
processing. If this problem
persists, call HP technical
support.
74407110
4ERetry the operation. If you get
the same message again,
reboot the computer. If
necessary, call HP technical
support.
A time-out error occurred.
Wait for the subsystem to
recover to the normal
condition, and then retry the
operation.
80017110
0iCall HP technical support.An internal logic
contradiction occurred.
85347110
0ECheck the error code in
Preview list.
Some settings could not be
applied normally. See the
error code.
86587110
0iCheck the contents, and retry.There is no volume.86597110
0iThe operation was ended
normally. Execute the next
operation.
The requested operation has
completed.
90027110
0iAn error occurred during the
indicated operation. See the
error code for each operation
in Preview List.
An error occurred. Check the
error code.
90057110
0iTo cancel, click [OK].Do you want to cancel?91017110
0iClick [OK] to execute the
operation.
Do you want to apply?91027110
Remote Web Console Error Codes 389