HP StorageWorks XP24000/XP20000 Remote Web Console Error Codes (AE131-96086, May 2011)

Table 64 Error Codes — Part Code 7105 (continued)
Failure
Level
Severity
Level
Recommended ActionError MessageError
Number
Part
Code
0iDelete the TrueCopy
Asynchronous for Mainframe
pair, and then retry the
operation, or use Reverse
Resync instead.
The Quick Restore command
has been rejected because
S-VOL or T-VOL of
ShadowImage for Mainframe
is combined with TrueCopy
Asynchronous for Mainframe,
and also CLPR numbers of
S-VOL and T-VOL of
ShadowImage for Mainframe
are different in the specified
pair.
688037105
0iDelete the XP Continuous
Access pair, XP Continuous
Access Journal pair, or XP
External Storage Access
Manager pair that is using XP
Thin Provisioning volumes,
and then retry the operation.
The initialize function cannot
be executed, because an XP
Continuous Access pair, an
XP Continuous Access Journal
pair, or an XP External
Storage Access Manager pair
is created by using XP Thin
Provisioning volumes.
688147105
0iUse another CTG, or release
the pair of XP Snapshot
where the specified CTG is
in use.
The command has been
rejected, because the
specified CTG is used by XP
Snapshot.
688327105
0iUse another CTG, or release
the pair of ShadowImage for
Mainframe where the
specified CTG is in use.
The command has been
rejected, because the
specified CTG is used by
ShadowImage for
Mainframe.
688337105
0iUse another CTG, or release
the pair of XP Business Copy
where the specified CTG is
in use.
The command has been
rejected, because the
specified CTG is used by
Business Copy.
688347105
0iSpecify the volume not used
as S-VOL of XP Business Copy
Operation for Mainframe
Fibre Data Migration, or retry
the operation after deleting
the current pair.
The XP Business Copy
Operation for FICON(R) Data
Migration failed, because
more than one T-VOL was
assigned for the specified
S-VOL.
688547105
Table 65 Error Codes — Part Code 7110
Failure
Level
Severity
Level
Recommended ActionError MessageError
Number
Part
Code
0WCheck the capacity of S-VOL
and T-VOL. Specify a volume
with the same capacity, and
retry the operation.
The T-VOL size differs from
the specified source volume
size.
51157110
0WYou cannot create the
specified pair. Delete the
created pair, and then retry
the operation.
You cannot create another
pair, because the number of
pairs exceeds the maximum.
51167110
0WSelect the S-VOL, and retry
the operation.
The S-VOL is not selected.51197110
0WSelect the T-VOL, and retry
the operation.
The T-VOL is not selected.51207110
388 Remote Web Console for Storage System Messages and Error Codes