HP StorageWorks XP24000/XP20000 Remote Web Console Error Codes (AE131-96086, May 2011)

Table 64 Error Codes — Part Code 7105 (continued)
Failure
Level
Severity
Level
Recommended ActionError MessageError
Number
Part
Code
0iCancel the setting to use the
T-VOL with other program
products, and then retry the
operation.
The command has been
rejected because FICON(R)
Data Migration Source
Volume is used in the
specified pair, and T-VOL is
used with other program
products.
• TrueCopy for Mainframe
• Universal Replicator for
Mainframe
• Compatible FlashCopy(R)
• FlashCopy Mirroring V2
• Volume Retention
Manager
687477105
5WThe command cannot be
executed because the
TrueCopy Asynchronous for
Mainframe pair is not in the
Split state. See the
Interoperability with Other
Products and Functions
section in the Hitachi
ShadowImage™ for
Mainframe User's Guide: HP
XP24000 Disk Array, HP
XP20000 Disk Array for the
relationship between the state
of TrueCopy Asynchronous
for Mainframe pair and the
ShadowImage for Mainframe
operations.
The command has been
rejected, because the
specified S-VOL is used as a
R-VOL of TrueCopy
Asynchronous for Mainframe
pair.
687497105
0iThe XP Business Copy
Operation for FICON(R) Data
Migration cannot be
executed in the current pair
configuration. Specify
FICON(R) Data Migration
source volume for S-VOL, and
specify volumes other than
FICON(R) Data Migration
source volume for T-VOL.
The XP Business Copy
Operation for FICON(R) Data
Migration failed, because the
specified pair consisted of an
S-VOL other than a FICON(R)
Data Migration Source
Volume, or a T-VOL that is a
FICON(R) Data Migration
Source Volume.
687677105
0iThe XP Business Copy
Operation for FICON(R) Data
Migration cannot be
executed in the current pair
status. Change the status of
the pair to SIMPLEX or
DUPLEX, and then retry the
operation.
The XP Business Copy
Operation for FICON(R) Data
Migration failed, because the
pair status of the specified
pair was not SIMPLEX or
DUPLEX.
687687105
0iThe XP Business Copy
Operation for FICON(R) Data
Migration cannot be
executed in the current pair
status. Change the status of
the pair to Suspend(Mig.),
and then retry the operation.
The XP Business Copy
Operation for FICON(R) Data
Migration failed, because the
pair status of the specified
pair was not Suspend(Mig.).
687697105
386 Remote Web Console for Storage System Messages and Error Codes