HP StorageWorks XP24000/XP20000 Remote Web Console Error Codes (AE131-96086, May 2011)

Table 64 Error Codes — Part Code 7105 (continued)
Failure
Level
Severity
Level
Recommended ActionError MessageError
Number
Part
Code
6EIf this problem persists, call
HP technical support.
An error occurred while
connecting to the subsystem.
Wait for a while, and then
retry the operation.
585757105
0iVolumes that do not belong
to CU group 0 are currently
not supported. Specify
another volume.
The operation failed because
the CU group of the specified
volume is not supported.
585857105
5WThe command cannot be
executed with the current
status of the Universal
Replicator for Mainframe
pair. See the Interoperability
with Other Products and
Functions section in the
Hitachi ShadowImage™ for
Mainframe User's Guide: HP
XP24000 Disk Array, HP
XP20000 Disk Array for the
relationship between the state
of Universal Replicator for
Mainframe pair and the
ShadowImage for Mainframe
operations.
The operation failed because
the specified S-VOL was used
by Delta resync of Universal
Replicator for Mainframe.
586307105
5WThe P-VOL of Universal
Replicator for Mainframe pair
for Delta resync cannot be
specified as an S-VOL.
Specify another volume.
The operation failed because
the specified T-VOL was used
by Delta resync of Universal
Replicator for Mainframe.
586317105
5WThe P-VOL of Universal
Replicator for Mainframe pair
for Delta resync cannot be
specified as a reserved
volume. Specify another
volume.
The reserve volume setting
failed because the specified
volume was used by Delta
resync of Universal Replicator
for Mainframe.
586327105
0iRetry the operation after the
Quick Format has completed.
The command has been
rejected, because Quick
Format is performed on the
specified S-VOL.
687437105
0iRetry the operation after the
Quick Format has completed.
The command has been
rejected, because Quick
Format is performed on the
specified T-VOL.
687447105
0iFICON(R) Data Migration
source volume cannot be
used as a T-VOL. Use other
volumes.
FICON(R) Data Migration
Source Volume is specified as
a T-VOL. FICON(R) Data
Migration Source Volume
cannot be used as a T-VOL.
687457105
0iThe specified pair cannot be
operated because the pair
uses FICON(R) Data
Migration source volume.
The command has been
rejected because the pair
uses FICON(R) Data
Migration Source Volume.
687467105
Remote Web Console Error Codes 385