HP StorageWorks XP24000/XP20000 Remote Web Console Error Codes (AE131-96086, May 2011)

Table 64 Error Codes — Part Code 7105 (continued)
Failure
Level
Severity
Level
Recommended ActionError MessageError
Number
Part
Code
0iWait for Flash Copy
processing of a L1 pair being
finished, and then execute
operation of target pair.
Because a L1 pair is F-Copy,
you cannot operate to L2.
89207105
0iCorrect the specified CT
Group and retry the
operation again.
The command was rejected
because the specified CT
Group is already used.
89417105
0iInstall the appropriate version
of DKC microcode.
The CT Group operation is
not available because the
target DKC microprogram
version does not support the
CT Group operation.
89427105
0iReset the Split time of
Consistency Group from the
mainframe host.
A pair status cannot be
changed because the Split
time of Consistency Group is
set.
89467105
0WWithdraw the FlashCopy
Mirroring V2 relationship.
The command has been
rejected, because the
FlashCopy Mirroring V2
relationship exists.
89917105
0EInstall additional shared
memory.
The command has been
rejected, because sufficient
amount of shared memory is
not installed.
89927105
0ESet the shared memory
extension setting for
FlashCopy Mirroring V2.
The command has been
rejected, because the shared
memory is not set for
FlashCopy Mirroring V2.
89937105
0WWait a few seconds, and
retry the operation.
The command has been
rejected, because the storage
system is busy.
89947105
0WWithdraw the FlashCopy
Mirroring V2 relationship.
The command has been
rejected, because the
FlashCopy Mirroring V2
relationship exists.
89957105
0WWait a few seconds, and
retry the operation.
The command has been
rejected, because the storage
system is busy.
89967105
5WUse the Reverse Resync
option.
Quick Restore cannot be
executed because the
specified pair is composed of
the external volumes with
different cache mode settings.
556457105
2EIf this problem persists, call
HP technical support.
An error occurred during SVP
processing. If this problem
persists, call HP technical
support.
563017105
2EIf this problem persists, call
HP technical support.
An error occurred during SVP
processing. If this problem
persists, call HP technical
support.
563027105
Remote Web Console Error Codes 381