HP StorageWorks XP24000/XP20000 Remote Web Console Error Codes (AE131-96086, May 2011)

Table 64 Error Codes — Part Code 7105 (continued)
Failure
Level
Severity
Level
Recommended ActionError MessageError
Number
Part
Code
0iYou cannot execute the
specified operation. Release
the Cache Residency
Manager for Mainframe
setting for the operation.
The command has been
rejected, because the
specified S-VOL is set for use
in Cache Residency Manager
for Mainframe.
86387105
0iYou cannot execute the
specified operation. Release
the Cache Residency
Manager for Mainframe
setting for the operation.
The command has been
rejected, because the
specified T-VOL is set for use
in Cache Residency Manager
for Mainframe.
86397105
0iWait until Reverse Copy or
Quick Restore completes.
The command has been
rejected, because the pair
sharing the S-VOL was in the
Reverse Copy or Quick
Restore status.
86407105
0iYou cannot execute the
specified operation. Release
the Reverse Copy for the
operation.
The pairs contain a pair in
the Reverse Copy status.
86417105
5WThe Resynchronize Volume
Pair operation cannot be
executed in the current pair
status. See the Adding Pairs
and Resynchronize Pair
Operations sections in the
Hitachi ShadowImage™ for
Mainframe User's Guide: HP
XP24000 Disk Array, HP
XP20000 Disk Array for the
relationship between the state
of pairs and the
ShadowImage for Mainframe
operations.
The Resynchronize Volume
Pair operation has been
rejected, because the
specified pair is not in the
state of Split.
86437105
0iCheck the pair status.The command has been
rejected, because the pair
status is not Split or Suspend.
86447105
0iYou cannot execute the
specified operation. Release
the XP Continuous Access
pair for the operation.
The Reverse Copy command
has been rejected, because
the S-VOL is shared as the
M-VOL of a XP Continuous
Access pair.
86457105
0iDelete the XP Continuous
Access pair.
The Reverse Copy request
was rejected, because the
S-VOL was shared with a XP
Continuous Access pair in the
non-suspend status.
86467105
0iDelete the XP Continuous
Access pair.
The Reverse Copy command
has been rejected, because
the T-VOL is shared with an
M-VOL of a XP Continuous
Access pair.
86477105
0iCheck the specified volume
number.
The boot device and the
S-VOL do not match in the
AddPair command.
86487105
Remote Web Console Error Codes 379