HP StorageWorks XP24000/XP20000 Remote Web Console Error Codes (AE131-96086, May 2011)

Table 64 Error Codes — Part Code 7105 (continued)
Failure
Level
Severity
Level
Recommended ActionError MessageError
Number
Part
Code
5WWait until the previous
operation completes.
The command has been
rejected, because the
previous command is being
processed.
85017105
0iDelete the XP Continuous
Access pair.
You cannot reserve the
volume, because a XP
Continuous Access pair exists
in the same subsystem frame.
85027105
0iDelete the XP Continuous
Access pair.
You cannot create the new
pair, because a XP
Continuous Access pair exists
in the same subsystem frame.
85037105
0iConfirm the composition, the
status, or the volume status of
the pair. (See the Hitachi
ShadowImage™ for
Mainframe User's Guide: HP
XP24000 Disk Array, HP
XP20000 Disk Array for the
relationship between the
composition of the pair, status
of the pair, or the volume
status of the pair and those
operations.)
The command was rejected.
Check the composition, the
status, or the volume status of
the pair.
85047105
5ESee the Adding Pairs and
Pair Status sections in the
Hitachi ShadowImage™ for
Mainframe User's Guide: HP
XP24000 Disk Array, HP
XP20000 Disk Array for the
relationship between the
status of pairs and the
commands that can be
accepted.
The command has been
rejected, because the
operation cannot be accepted
in the current pair status.
85057105
0iCheck the contents, and retry.The command has been
rejected, because the
specified T-VOL or reserved
volume is used by the host.
85067105
0iVary the T-VOL or the
reserved volume offline from
the mainframe host, and then
issue the command again.
The Split Pair command was
issued to the pairs in the split
status.
85077105
0iYou cannot execute the
AddPair operation to the
pairs in the Split status.
The AddPair command was
issued to the pairs in the Split
status.
85087105
0iCheck the contents, and retry.The Split command with the
QUIESCE specification was
issued to a secondary boot
device.
85097105
0iCheck the contents, and retry.The M-VOL Suspend
command was issued to a
secondary boot device.
85107105
370 Remote Web Console for Storage System Messages and Error Codes