HP StorageWorks XP24000/XP20000 Remote Web Console Error Codes (AE131-96086, May 2011)

Table 3 Error Codes — Part Code 0003 (continued)
Failure
Level
Severity
Level
Recommended ActionError MessageError
Number
Part
Code
6EIf the Concurrent Copy or the
Compatible XRC operation is
in progress in the target
volumes, cancel the
Concurrent Copy job or
delete a Compatible XRC
pair via the host. If the
Concurrent Copy or the
Compatible XRC operation is
not in progress in the target
volumes, issue the LISTSESS
and LISTDVCS commands,
check the SESSION ID No.,
and terminate SESSION by
means of the TERMSESS
command.
The Concurrent Copy or
Compatible XRC operation is
in progress in the target
volumes. Cancel the
Concurrent Copy job or
delete a Compatible XRC
pair via the host.
22000003
6ECorrect settings, and then
retry.
Processing cannot be
performed because of Data
Retention settings.
22010003
6ECheck the settings, and then
retry the operation.
The specified volume cannot
be processed due to the
effect of the access attribute
assigned by Volume
Retention for Mainframe.
22020003
6EDelete or suspend all pairs to
which the journal volumes
belong.
Devices to be maintained
include journal volumes.
Delete or suspend all pairs to
which the journal volumes
belong.
22040003
6EDelete all pairs to which the
journal volumes belong.
Devices to be maintained
include journal volumes.
Delete all pairs to which the
journal volumes belong.
22050003
6ECorrect settings, and then
retry.
The volume cannot be
configured as a command
device because the volume
does not have Read/Write
attribute.
25010003
6ECorrect settings, and then
retry.
The LUs cannot be combined
or released because the
volumes don't have
Read/Write attribute.
25020003
6ECorrect settings, and then
retry.
The LUs cannot be combined
or released because the
volumes don't have
Read/Write attribute.
25030003
5WRelease the reserved attribute
of the target volume by using
Data Retention Utility.
No settings can be made
because of a volume reserved
for RAID Manager.
25040003
6ECall HP technical support and
finish adding volumes.
No path can be set to the
specified volume because the
addition of volumes is not
finished.
25100003
36 Remote Web Console for Storage System Messages and Error Codes