HP StorageWorks XP24000/XP20000 Remote Web Console Error Codes (AE131-96086, May 2011)

Table 61 Error Codes — Part Code 7005 (continued)
Failure
Level
Severity
Level
Recommended ActionError MessageError
Number
Part
Code
0iYou cannot create a pair
using these volumes.
To create a pair by using a
volume without VMA, you
must only use volumes without
VMA. To create a pair by
using a volume with VMA,
you must only use volumes
with VMA.
The command was rejected,
because you tried to create
a volume pair formed with a
volume to which VMA is set
by Data Retention Utility and
a volume without VMA.
552647005
6EIncrease the licensed
capacity of Data Retention
Utility, and retry the
operation. When an SLPR is
allocated, check the licensed
capacity of the SLPR.
You cannot create the pair,
because the licensed capacity
of Data Retention Utility is
insufficient.
553017005
5WUse the Reverse Resync
option.
Quick Restore cannot be
executed because the
specified pair is composed
of the external volumes with
different cache mode settings.
556457005
2EIf this problem persists, call
HP technical support.
An error occurred during SVP
processing. If this problem
persists, call HP technical
support.
563017005
2EIf this problem persists, call
HP technical support.
An error occurred during SVP
processing. If this problem
persists, call HP technical
support.
563027005
2EIf this problem persists, call
HP technical support.
An error occurred during SVP
processing. If this problem
persists, call HP technical
support.
563037005
3ESelect another window. To
set this function, contact the
storage administrator.
This function cannot be used
by the storage partition
administrator.
565247005
2EIf this problem persists, call
HP technical support.
An error occurred during SVP
processing. If this problem
persists, call HP technical
support.
571017005
2EIf this problem persists, call
HP technical support.
An error occurred during SVP
processing. If this problem
persists, call HP technical
support.
571027005
0iSelect a different volume or
release the consistency group
setting.
The command has been
rejected because the cascade
request for creating cascade
pairs composed of volumes
belonging to the same
consistency group was
issued.
580007005
358 Remote Web Console for Storage System Messages and Error Codes