HP StorageWorks XP24000/XP20000 Remote Web Console Error Codes (AE131-96086, May 2011)

Table 61 Error Codes — Part Code 7005 (continued)
Failure
Level
Severity
Level
Recommended ActionError MessageError
Number
Part
Code
5WPairs cannot be created with
the specified P-VOL any
more. See the Create Pair
Operation section in the HP
StorageWorks
XP24000/XP20000 Business
Copy Software User's Guide
for the composition of pairs.
The command has been
rejected, because the number
of pairs created with the
specified P-VOL has reached
the maximum.
85977005
0iCheck the volume status.The specified volume is not a
P-VOL.
85987005
0iSpecify other P-VOL, and
retry the operation. Or delete
the pair of the specified
volume, and then retry the
operation.
The specified volume is
already a P-VOL.
85997005
0iCheck the RAID level, and
specify a volume of the
supported RAID level, and
then retry the operation.
The RAID level of the
specified volume is not
supported.
86007005
0iCheck the contents, and retry.The specified P-VOL cannot
be paired with a backup
server volume.
86017005
5WThe volume used as an S-VOL
of the other pair cannot be
used as a P-VOL.
The command has been
rejected, because the
specified P-VOL has already
been used as an S-VOL of the
other pair.
86027005
0iCheck the pair status.The Pairresync command was
issued to a device in the
SMPL status.
86057005
5WWhen the P-VOL of L1 pair is
used as P-VOL of XP
Continuous Access pair or XP
External Storage Access
Manager pair, L2 pair cannot
be created.
The operation to create L2
pair has been rejected
because the P-VOL of L1 pair
is used as P-VOL of XP
Continuous Access pair or XP
External Storage Access
Manager pair.
86067005
5WThe requested command
cannot be executed in the
current status of XP
Continuous Access pair or XP
External Storage Access
Manager pair.
See the section about the
sharing XP Business Copy
volumes in the HP
StorageWorks
XP24000/XP20000 Business
Copy Software User Guide
for the relation between the
state of XP Continuous Access
pair or XP External Storage
Access Manager pair and the
XP Business Copy operations.
The command has been
rejected because the
specified S-VOL is used as
P-VOL of XP Continuous
Access pair or XP External
Storage Access Manager
pair.
86077005
Remote Web Console Error Codes 353