HP StorageWorks XP24000/XP20000 Remote Web Console Error Codes (AE131-96086, May 2011)

Table 61 Error Codes — Part Code 7005 (continued)
Failure
Level
Severity
Level
Recommended ActionError MessageError
Number
Part
Code
3WIf the same problem persists
despite retrying, call HP
technical support.
The SVP is busy. Please wait
for a while, and then retry the
operation.
60237005
0WWait a few seconds, and
retry the operation.
Processing in progress.
Please wait for a while, and
then retry the operation.
65027005
0iWait a few seconds, and
retry the operation.
The target volume status is
being changed to SMPL.
65037005
0EIf this problem persists, call
HP technical support.
This error code is not
registered.
73107005
4ERetry the operation. If you get
the same message again,
reboot the computer. If
necessary, Call HP technical
support.
A time-out error occurred.80007005
4ERetry the operation. If you get
the same message again,
reboot the computer. If
necessary, Call HP technical
support.
A time-out error occurred.80017005
4ERetry the operation. If you get
the same message again,
reboot the computer. If
necessary, Call HP technical
support.
A time-out error occurred.81007005
0iAdd shared memory or
confirm whether the
necessary program product
key is installed.
Sufficient amount of shared
memory is not installed or the
program product is not
installed.
85007005
5WWait a few seconds, and
retry the operation.
The command has been
rejected, because the
previous command is being
processed.
85017005
0iDelete the XP Continuous
Access pair.
You cannot reserve the
volume, because a XP
Continuous Access pair exists
in the same subsystem frame.
85027005
0iDelete the XP Continuous
Access pair.
You cannot create the new
pair, because a XP
Continuous Access pair exists
in the same subsystem frame.
85037005
0iConfirm the composition, the
status, or the volume status of
the pair. (See the HP
StorageWorks
XP24000/XP20000 Business
Copy Software User's Guide
for the relationship between
the composition of the pair,
status of the pair, or the
volume status of the pair and
those operations.)
The command was rejected.
Check the composition, the
status, or the volume status of
the pair.
85047005
346 Remote Web Console for Storage System Messages and Error Codes