HP StorageWorks XP24000/XP20000 Remote Web Console Error Codes (AE131-96086, May 2011)

Table 60 Error Codes — Part Code 6810 (continued)
Failure
Level
Severity
Level
Recommended ActionError MessageError
Number
Part
Code
0iCorrect the setting, and then
retry. If the same problem
persists despite retrying, call
HP technical support.
The Sleep Time setting is
incorrect.
552196810
0iTo continue processing, click
[OK]. To stop processing,
click [Cancel].
This function will apply the
setting to all the target CLPRs.
This function will overwrite
the setting on a CLPR if the
setting is already applied to
the CLPR. Are you sure you
want to continue this
operation?
590466810
0iTo continue processing, click
[OK]. To stop processing,
click [Cancel].
Depending on settings, these
pairs may become suspended
if a XP Continuous Access
Asynchronous pair, a
TrueCopy Asynchronous for
Mainframe pair, or a CC
pair exists. Are you sure you
want to continue this
operation?
590476810
Table 61 Error Codes — Part Code 7005
Failure
Level
Severity
Level
Recommended ActionError MessageError
Number
Part
Code
2EIf this problem persists, call
HP technical support.
An error occurred during SVP
processing. If this problem
persists call HP technical
support.
50137005
2EIf this problem persists, call
HP technical support.
An error occurred during SVP
processing. If this problem
persists, call HP technical
support.
50997005
0ECall HP technical support.An internal logic error
occurred.
56257005
0iRelease the write-protection
by Data Retention Utility.
The specified volume cannot
be used because it is
write-protected by Data
Retention Utility.
56267005
0iSelect other volumes that
have the same number of
LBA.
You cannot set a pair
because the number of LBA
is different for the specified
volumes.
56557005
0iChange the Data Retention
Utility setting so that the
specified volumes can be
used as S-VOLs.
This operation has been
rejected. The Data Retention
Utility setting does not allow
the specified volume(s) to be
specified as S-VOL(s).
58217005
2EIf this problem persists, call
HP technical support.
An error occurred during SVP
processing. If this problem
persists call HP technical
support.
60127005
Remote Web Console Error Codes 345